DuraLabelStaff Answer
Jul 13, 2026 - 02:57 PM
It is recommended to prep the floor before applying. For cooler/freezer floor at -10 degrees, we recommend using PathFinder Cold Storage. Please contact your account manager or email safety@duralabel.com to learn more about this product.
Floor Preparation Instructions:
1. Clear out and block off the area where applying tape.
2. Sweep up any dirt or debris from the floor.
3. Clean the floor with a general cleaner (avoid citrus-based). Scrub with clean rag or brush.
4. After it’s dry, wipe the surface with Isopropyl alcohol to remove any leftover residue and let it dry.
Clean Floor Test:
1. Cut a small square of tape from your roll.
2. Stick to the floor for 10 seconds.
3. Peel off and check the adhesive side. If there’s dirt or debris, repeat floor preparation steps until the clean.
